Speed Skating

Inline skating

Roller skates

recreational skating/HOCKEY

Patinage de vitesse

Patinage en ligne

Patinage à roulettes

Patinage de loisir/Hockey

SKATE-TEC OTTO T2 Flex blades (blades only)

$814.99

Short track Otto blades

SKATE-TEC OTTO T2 Flex blades – The next generation short track blade

The Otto was designed with the idea to challenge the fixed distance of 165mm between the cups.

Short track Otto blades ONLY

SKATE-TEC OTTO T2 Flex blades – The next generation short track blade

Introduction

Making this distance bigger allows the tube to flex more and you can use it with less bend. Less bend in turn reduces the friction and increases the gliding capabilities at higher speeds. This has been achieved through the use of a bridge connecting the front and the back together with a span of 215mm while keeping the 165mm mounting points on the boot. Another significant benefit of the blade is that with the bridge design, the bending changes a lot less – to almost nothing at the start.

Tube style

We have a couple of variations available, all with a spacing of 215mm. This seems to be the sweet spot at the moment, but we may opt for a wider spacing in the future. The tubes are available in Flex and Firm.  The Flex comes in regular Flex and Flex Flat Top. The Firm gives the most pressure, the Flex the least. The pressure difference between a Firm and a Flex is a bit more noticeable the with the MWave tubes.

Tuning

After excellent feedback from skaters like Shaolin Liu, Wu Dajing and Victor Ahn we found there is no optimal default setup for the skate. You can tune it to your own liking. If you want long powerful strokes, you can go for a flatter rocker in the middle , and slightly less bend than normal (roughly 2 less than the M-Wave on a Marchese style gauge). If you prefer a lot steering and a more agile feeling, you can keep a normal rocker with a lot less bend (about 5 less). You can also let the bend increase less towards the front. One thing some skaters experience is that the blade is digging in with the front at high speed laps. This can be solved by making the front rounder, or using less bend (the latter being the easier solution).

Height

We have used a different method of determinig the height of the bridge (before the cups). Instead of +1 etc, we are now measuring the distance between the back mounting point and the bottom of the lip. For the height, it is advisable to go 1-2mm higher than you normally would, since you will be able to lean more and thus your boot would touch the ice quicker.

 

 

 

Tube: 7000 Aluminum anodized tube

Blade: 1,1mm thick

62HRC Bi-Metal

Pre-bent

Stiffness: Flex for skaters between 110lbs to 145lbs

DON’T FORGET TO MAKE THEM ROCKERED/BEND : rocker  –  bend 

 

Lenght

16.75", 17.25", 17.75", 16", 16.5", 17", 17.5", 18"

Reviews

There are no reviews yet.

Be the first to review “SKATE-TEC OTTO T2 Flex blades (blades only)”
1. Introduction
Welcome to xactskateshop.com. We place great importance on the privacy and protection of our users’ personal data. This Privacy Policy details how we collect, use, retain, and protect your personal information.
2. Collection of Information
When you provide us with information via our website, especially through contact forms or similar mechanisms, we only collect the information necessary to respond to your information request.
3. Use of Information
Any confidential information you provide to us is used solely for the purpose of your information request. We commit to not using this information for other purposes, especially not for commercial or advertising purposes, without your explicit consent.
4. Sharing of Information
We do not share, sell, or transmit your personal information to third parties unless required by law or necessary to respond to your information request.
5. Security
We have implemented appropriate technical and organizational measures to protect your data from any loss, unauthorized use, access, or disclosure. However, no website is completely secure, so we encourage you to be cautious and not to transmit sensitive or confidential information that would not be strictly necessary.
6. Your Rights
You have the right to request access, correction, or deletion of your personal data held by xactskateshop.com. If you wish to exercise any of these rights, please contact us using the means provided on our site.
7. Changes
We reserve the right to change this privacy policy at any time. Any changes will be posted on this page, and if they are significant, we will inform you by other appropriate means.
8. Contact
If you have questions about this privacy policy or if you wish to exercise your rights, please contact us using the contact details provided on our site.
9.Data Processing Responsible Person
Marc Pelletier 450-419-9941 marc@xactperformance.com